This powerful unit is perfect for the smaller home shop. Simply hang it from the ceiling turn it on and it will clear the room of those fine dust particles. This unit was the first in the industry with remote contro (more...)

This powerful unit is perfect for the smaller home shop. Simply hang it from the ceiling turn it on and it will clear the room of those fine dust particles. This unit was the first in the industry with remote control, timer and three speeds which have quickly become the industry standard. (less...)

The Jet 3-speed Air Filtration Systems clean and circulate the air in your shop while you work, filtering 98-99% of all particles, five microns in size and 85% of particles one micron in size. And with the timer, yo (more...)

The Jet 3-speed Air Filtration Systems clean and circulate the air in your shop while you work, filtering 98-99% of all particles, five microns in size and 85% of particles one micron in size. And with the timer, you come into your shop, set the timer for two, four or eight hours and forget it. The system automatically shuts down at the time you've set. They use a convenient standard size outer filter, run quietly and come with a remote control for convenience.
Grabs 98% of anything from 5 microns up in size and 89% of single micron size particles
Prefilter is 5 micron
Inner filter is 1 micron
Outer filter is a disposable electrostatic filter with a paper frame
Units are designed to be set on a workbench or hung from the ceiling, either tight against the ceiling or hanging from chains
Eyebolts are in place for hanging the unit
The three pocket filter fits inside, and can be blown out
Filters are easily replaced, without tools
The powder coated metal box is heavy duty
Fan and motor are also constructed for durability
Two easy grip handles inset on both sides for ease of handling
Quiet running so it can be left on during work (less...)

Model AFS-2000 is 1700 CFM and has 3 speeds: 800, 1200, 1700. The AFS-2000 can filter the air in a 20' x 20' x 8' shop in under two minutes, and filter the air in that size shop 31 times an hour. The Jet 3-speed Air (more...)

Model AFS-2000 is 1700 CFM and has 3 speeds: 800, 1200, 1700. The AFS-2000 can filter the air in a 20' x 20' x 8' shop in under two minutes, and filter the air in that size shop 31 times an hour.
The Jet 3-speed Air Filtration Systems clean and circulate the air in your shop while you work, filtering 98-99% of all particles, five microns in size and 85% of particles one micron in size. And with the timer, you come into your shop, set the timer for two, four or eight hours and forget it. The system automatically shuts down at the time you've set. They use a convenient standard size outer filter, run quietly and come with a remote control for convenience.
Grabs 98% of anything from 5 microns up in size and 89% of single micron size particles
Prefilter is 5 micron
Inner filter is 1 micron
Outer filter is a disposable electrostatic filter with a paper frame
Units are designed to be set on a workbench or hung from the ceiling, either tight against the ceiling or hanging from chains
Eyebolts are in place for hanging the unit
The three pocket filter fits inside, and can be blown out
Filters are easily replaced, without tools
The powder coated metal box is heavy duty
Fan and motor are also constructed for durability
Two easy grip handles inset on both sides for ease of handling
Quiet running so it can be left on during work (less...)

Model DC-650CK (with canister) The ideal cornerstone to an inexpensive dust collection system that will efficiently collect chips and dust in your woodworking shop. Jet single stage dust collectors are built to last (more...)

Model DC-650CK (with canister) The ideal cornerstone to an inexpensive dust collection system that will efficiently collect chips and dust in your woodworking shop.
Jet single stage dust collectors are built to last and are backed by a two year limited factory warranty. Features include:
Welded, sealed joints
Hook up one to three machines for optimum dust cleaning
Quick-install collection bag makes emptying and re-attaching a snap
Single-stage design for economical and quiet operation
Includes four casters for maneuverability and total portability
High air velocity (CFM) design stands up to any competitive specifications
Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty Improved metal impellers that are balanced and run on ball bearings
Single stage design for economical, quiet operation
With the 2 micron canister filter you'll never have to deal with filter bags and messy clean-up again!You simply turn the handle on top, and the dust from the filter falls directly into the convenient plastic lower collection bag. Specifications:
Motor: 115/230V, 1 hp, 1 ph
Air Flow - 650 CFM @ 4"
4” hose connection
Overall dimensions - 27" x 14" x 57"
Shipping weight 95 lbs.5 Micron Filter Bag for DC-650 models. Capture dust particles as small as 5 microns with this heavy duty filter bag. (less...)

Cyclonic action separates the heavier chips and particles and disposes of them into the 55-gallon drum Large 8-fin, 14-in. steel impeller creates high velocity air flow, lets lighter dust particles pass through and (more...)

Cyclonic action separates the heavier chips and particles and disposes of them into the 55-gallon drum
Large 8-fin, 14-in. steel impeller creates high velocity air flow, lets lighter dust particles pass through and be trapped in the filter
Filter bag provides almost 40 sq. ft. of filtration surface area of all particles 5 microns or larger
Collection bag has "snap-in" design for quick, easy installation and removal
EXCLUSIVE pressure tube allows use of a plastic collection bag in the drum without getting sucked into the cyclone
Special rectangular inlet pipe for added separation and additional air flow
Steel construction with welded seams and powder-coated paint ensures long, dependable performance
3HP motor is totally enclosed and fan-cooled to keep dust and contaminants out
Air Flow @ 4" (CFM) : 1450
Air Inlet (in.) : 8
Air outlet (in.) : 8
Amps : 15
Bag Diameter (in) : 20
Family Description : JET® HIGH EFFICIENCY CYCLONIC DUST COLLECTION SYSTEMS
Filter Bag/Canister Length (in.) : 60
Height : 0 inch
Impeller Diameter (in.) : 14
Impeller Fins : 8
Impeller Material : steel
Length : 0 inch
Model Number : JC-3CF
Motor HP : 3HP
Motor Phase : 1Ph
Motor Voltage : 230V
Net Weight : 280 pound
Overall Dimensions : 67-3/4 x 45-3/8 x 111
Part Number : 708654K
Particle Size (Micron) : 99% @ 2 micron/130 sq. ft.
Prewired : 230V
Separator Tank Diameter (in.) : 19-1/2
Separator Tank Height (in.) : 17-3/8
Ship Weight : 280 pound
Sound Rating (dB) : 80
Static Pressure (inch of water) : 12.12
Width : 0 inch (less...)

Jet Model DC-1200 and DC-1200CK. The 12" impeller provides efficient airflow during dust-heavy applications. The high air velocity design optimizes coverage for larger shops. Durable casters provide smooth, fast mob (more...)

Jet Model DC-1200 and DC-1200CK. The 12" impeller provides efficient airflow during dust-heavy applications. The high air velocity design optimizes coverage for larger shops. Durable casters provide smooth, fast mobility.
Fully rated quality motors for longer machine life and enhanced efficiency.
Collector bags feature convenient fill sight and elastic band for easy installation.
Available with 30 micron bag or 2 micron canister. (less...)

This new heavy-duty JET Shaper is available with a powerful 3HP, 1Ph motor with magnetic controls. The four-speed 4000, 6000, 8000, 10000 RPM step pulley drive with quick release lever allows you to select the best (more...)

This new heavy-duty JET Shaper is available with a powerful 3HP, 1Ph motor with magnetic controls. The four-speed 4000, 6000, 8000, 10000 RPM step pulley drive with quick release lever allows you to select the best speed and torque for different cutter diameters. It comes standard with independently adjustable left and right fences, and a micro-adjust control for precise positioning. (less...)

Jet Model JWS-25CS. Capable of using 1/2" and 3/4" spindle bits, this shaper features a powerful 3 hp single-phase motor housed within a sturdy, 1-piece steel stand. A 25" x 18" solid cast-iron table and 25" x 7" e (more...)

Jet Model JWS-25CS. Capable of using 1/2" and 3/4" spindle bits, this shaper features a powerful 3 hp single-phase motor housed within a sturdy, 1-piece steel stand.
A 25" x 18" solid cast-iron table and 25" x 7" extension provide plenty of room for working with stock and utilizes T-slots.
Four fully adjustable hold-downs help keep the workpiece steady while shaping.
An up-front hand wheel, unique ratcheting style levers for quick and easy fence assemblies, and a 2-speed pulley drive are just some of the other features. 8,000/10,000 rpm, reversible with 4" dust port. (less...)

Four-speeds (4000, 6000, 8000, 10000 RPM) let you select the best speed and torque for different cutter diameters Powerful 3HP, 1Ph, 5HP, 1Ph or 5HP, 3Ph motor with magnetic controls Independently adjustable left an (more...)

Four-speeds (4000, 6000, 8000, 10000 RPM) let you select the best speed and torque for different cutter diameters
Powerful 3HP, 1Ph, 5HP, 1Ph or 5HP, 3Ph motor with magnetic controls
Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
Large 26-3/4” X 32-1/4” precision ground cast iron table provides a durable work area, predrilled for power feeder
Poly-V-belt transfers maximum power to the spindle
Starting Pins for irregular shaping
Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
Extra-large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
Reversible spindle speeds for diverse shaping jobs
4" Dust port built into fence for convenient hookup to any dust collection system
Spindle lock for safe and easy cutter set-up
Spindle height scale
Amps : 17
Dust Collection Minimum CFM Required : 400
Dust Port Diameter (OD/in) : 4
Electrical Controls - Magnetic Starter : Magnetic Starter
Fence Size (L x H/in) : 4-3/4 X 16
Fence Travel (Major and Minor/in) : 4, 1
Height (in): 41
Length (in): 30
Maximum Diameter Cutter Above Table (in) : 7-1/2
Maximum Diameter Cutter Below Table (in) : 6
Motor HP : 5
Motor Phase : 1 or 3
Motor Voltage : 230
Net Weight (lb): 473
Prewired : 230
Reversable : Yes
Router Bit Collet Diameter (in) : 1/4, 1/2 (optional)
Spindle Diameter (in) : 3/4
Spindle Size Under Nut (in) : 4
Spindle Speed (RPM) : 4000, 6000, 8000, 10000
Spindle Travel (in) : 4
Table Height From Floor (in) : 33-1/4
Table Insert Opening Diameter (in) : 2-5/8, 4-7/8
Table Inserts : 2
Table Opening Diameter (in) : 7-1/4
Table Size (in) : 26-3/4 X 32-1/4
Table T-Slot (in) : Yes
Width : 40 (in) (less...)

Four-speeds (4000, 6000, 8000, 10000 RPM) let you select the best speed and torque for different cutter diameters Powerful 3HP, 1Ph, 5HP, 1Ph or 5HP, 3Ph motor with magnetic controls Independently adjustable left an (more...)

Four-speeds (4000, 6000, 8000, 10000 RPM) let you select the best speed and torque for different cutter diameters
Powerful 3HP, 1Ph, 5HP, 1Ph or 5HP, 3Ph motor with magnetic controls
Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
Large 26-3/4” X 32-1/4” precision ground cast iron table provides a durable work area, predrilled for power feeder
Poly-V-belt transfers maximum power to the spindle
Starting Pins for irregular shaping
Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
Extra-large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
Reversible spindle speeds for diverse shaping jobs
4" Dust port built into fence for convenient hookup to any dust collection system
Spindle lock for safe and easy cutter set-up
Spindle height scale
Amps : 17
Dust Collection Minimum CFM Required : 400
Dust Port Diameter (OD/in) : 4
Electrical Controls - Magnetic Starter : Magnetic Starter
Fence Size (L x H/in) : 4-3/4 X 16
Fence Travel (Major and Minor/in) : 4, 1
Height (in): 41
Length (in): 30
Maximum Diameter Cutter Above Table (in) : 7-1/2
Maximum Diameter Cutter Below Table (in) : 6
Motor HP : 5
Motor Phase : 1 or 3
Motor Voltage : 230
Net Weight (lb): 473
Prewired : 230
Reversable : Yes
Router Bit Collet Diameter (in) : 1/4, 1/2 (optional)
Spindle Diameter (in) : 3/4
Spindle Size Under Nut (in) : 4
Spindle Speed (RPM) : 4000, 6000, 8000, 10000
Spindle Travel (in) : 4
Table Height From Floor (in) : 33-1/4
Table Insert Opening Diameter (in) : 2-5/8, 4-7/8
Table Inserts : 2
Table Opening Diameter (in) : 7-1/4
Table Size (in) : 26-3/4 X 32-1/4
Table T-Slot (in) : Yes
Width : 40 (in) (less...)

Powerful 1-1/2 hp T.E.F.C., 1 Ph motor with 2 reversible speeds for added versatility (7,000 & 9,000 RPM) Solid cast iron work surface is 22-3/8" x 18-1/8" Starting pins for irregular shaping Independent left and ri (more...)

Powerful 1-1/2 hp T.E.F.C., 1 Ph motor with 2 reversible speeds for added versatility (7,000 & 9,000 RPM)
Solid cast iron work surface is 22-3/8" x 18-1/8"
Starting pins for irregular shaping
Independent left and right fences are micro-adjustable
Includes 1/2" and 3/4" interchangeable spindles, and 1/2" and 1/4" router bit collets
Spindle lock allows quick, easy cutter set-up and removal
Fully enclosed, heavy-duty steel stand
4" dust port (less...)

Powerful 1/2 HP TEFC 1725 RPM motor for solid performance and trouble free operation Heavy duty cast iron and steel construction for durability and stability Three jaw drill chuck with extended chuck key for ease of (more...)

Powerful 1/2 HP TEFC 1725 RPM motor for solid performance and trouble free operation
Heavy duty cast iron and steel construction for durability and stability
Three jaw drill chuck with extended chuck key for ease of positive grip on mortise drill bit
Rack and pinion head raising and lowering allows for positive drilling control
Two hinged side doors to allow for complete drill chuck access
Removable safety toggle switch for prevention of accidental turn on
1/2" max. mortise chisel capacity
4-3/4" head stroke
Includes free 1/4", 3/8" and 1/2" chisel and bit sets (less...)

Heavy-duty cast iron and steel construction provides durability and stability during use Dependable rack-and-pinion head adjustment gives you accurate drilling control Long, multi-position mortising handle let you r (more...)

Heavy-duty cast iron and steel construction provides durability and stability during use
Dependable rack-and-pinion head adjustment gives you accurate drilling control
Long, multi-position mortising handle let you reposition the feed handle for easier operation and optimum handle position
Three-jaw drill chuck keeps a positive grip on mortising bits with up to 1-1/8" diameter shanks
Two hinged side doors allow easy access to the drill chuck
Quick adjust depth stop for uniform mortise depths
Industrial style push button switch
Powerful 1HP motor provides consistently smooth performance
Adjustable work stop for repeat cuts
Quick position table mounted swiveling vise clamp accommodates angled work pieces
Handwheels control smooth linear and cross table motions
Base Size (in.) : 14 x 16
Bushing Size (in.) : 5/8, 3/4, 1-1/8
Chisel Center to Fence (in.) : 4
Chisel Shank Capacity (in.) : 5/8, 3/4, 1-1/8
Chuck Size (in.) : 1/2
Family Description : CLOSED STAND MORTISER
Fence Size (L x H/in.) : 3-1/2 x 20
Head Stroke (in) : 8
Height : 0 inch
Length : 0 inch
Model Number : JFM-5
Motor Amps : 11/5.5
Motor HP : 1HP
Motor Phase : 1Ph
Motor Voltage : 115/230V
Net Weight : 291 pound
Part Number : 708589K
Prewired : 115V
Ship Weight : 291 pound
Spindle Speed (RPM) : 1725
Width : 0 inch (less...)

Remote-controlled digital timer can be programmed for up to 99 minutes All-metal duct construction for rigidity and improved air flow Dual 4" dust ports for simultaneous collection from two machines 1-3/4HP motor of (more...)

Remote-controlled digital timer can be programmed for up to 99 minutes
All-metal duct construction for rigidity and improved air flow
Dual 4" dust ports for simultaneous collection from two machines
1-3/4HP motor offers plenty of power for effective air movement
Cloth collection bag with view window uses snap ring for rapid installation/removal
10 cubic feet capacity collection bag reduces number of bag changes.
Tall filter bag requires less cleaning due to the larger surface area
Four swivel casters for shop maneuverability
1-3/4HP TEFC motor
Remote control
Cloth filter bag with strap
Cloth collection bag
Swivel casters
Dual 4” dust port
1-Hose Connection Diameter 6 (in) :
2-Hoses Connection Diameter (in): 4
Air Flow @ 4" (CFM) : 1,064 @ 6"
Air Inlet (in) : (1) at 6" or (2) at 4"
Amps : 15/7.5
Bag Diameter (in) : 20
Collection Bag Capacity (cu. ft) : 10
Collection Bag Length (in) : 30
Filter Bag/Canister Length (in) : Filter Bag - 48
Height (in): 79
Impeller Diameter (in) : 12
Impeller Fins : 6
Impeller Material : steel
Length : 37 (in)
Motor HP : 1-3/4HP
Motor Phase : 1PH
Motor Voltage : 115/230V
Net Weight (lb) : 140
Overall Dimensions : 37 x 29 x 79
Part Number : 1791077BK
Particle Size (Micron) : 96% of 30 micron particles
Prewired : 115V
Remote Control : Yes
Sound Rating (dB) : 75-90
Static Pressure (inch of water) : 11.31 (1" water)
Velocity @ 4" (FPM) : 5,374 @ 6"
Width (in) : 29 (less...)

Remote-controlled digital timer can be programmed for up to 99 minutes Canister filter offers over six times filtering surface area of standard bags All-metal duct construction for rigidity and improved air flow 1-3 (more...)

Remote-controlled digital timer can be programmed for up to 99 minutes
Canister filter offers over six times filtering surface area of standard bags
All-metal duct construction for rigidity and improved air flow
1-3/4HP motor offers plenty of power for effective air movement
Dual 4” dust ports for simultaneous collection from two machines
Collection bag uses a snap ring, so it can be installed/removed rapidly
10 cubic feet capacity collection bag reduces number of bag changes.
Four swivel casters for shop maneuverability.
1-3/4HP TEFC motor
Remote control
Canister filter
Set of 5 clear collection bags
Swivel casters
Dual 4” dust port
1-Hose Connection Diameter (in): 6
2-Hoses Connection Diameter (in): 4
Air Flow @ 4" (CFM) : 1,064 @ 6"
Air Inlet (in) : (1) at 6" or (2) at 4"
Amps : 15/7.5
Bag Diameter (in): 20
Collection Bag Capacity (cu ft): 10
Collection Bag Length (in): 30
Filter Bag/Canister Length (in) : Canister 21 dia x 26 ht
Height (in): 72
Impeller Diameter (in) 12
Impeller Fins : 6
Impeller Material : steel
Length (in): 37
Motor HP : 1-3/4HP
Motor Phase : 1PH
Motor Voltage : 115/230V
Net Weight (lb): 150
Overall Dimensions : 37 x 29 x 72
Part Number : 1791077CK
Particle Size (Micron) : 98% of 2 micron particles: 86% of 1 micron particles
Prewired : 115V
Remote Control : Yes
Sound Rating (dB) : 75-90
Static Pressure (inch of water) : 11.31 (1" water)
Velocity @ 4" (FPM) : 5,374 @ 6"
Width (in): 29 (less...)

Remote-controlled digital timer can be programmed for up to 99 minutes All-metal duct construction for rigidity and improved air flow 30-micron filter bags for improved capture of fine dust particles The large impel (more...)

Remote-controlled digital timer can be programmed for up to 99 minutes
All-metal duct construction for rigidity and improved air flow
30-micron filter bags for improved capture of fine dust particles
The large impeller is powered by a 3HP motor for peak performance
Triple 4” dust ports allow for several hoses to be attached at the same time
Cloth collection bags with view window use a snap ring for rapid installation/removal
10 cubic feet collection bag capacity reduces number of bag changes.
Tall filter bags require less cleaning due to the larger surface area
Four swivel casters for shop maneuverability
3HP TEFC motor
Remote control
Magnetic starter
2 Cloth filter bags with straps
2 Cloth collection bags
Swivel casters
Triple 4” dust port
1-Hose Connection Diameter (in) : 8
2-Hoses Connection Diameter (in) : 4
3-Hoses Connection Diameter (in.) : 4
Air Flow @ 4" (CFM) : 234 (1754 @ 8")
Air Inlet (in) : (3) at 4" or (1) at 8"
Amps : 15
Bag Diameter (in) : 20
Collection Bag Capacity (cu. ft.) : 10
Collection Bag Length (in) : 30
Filter Bag/Canister Length (in) : Filter Bag - 48
Height (in): 94
Impeller Diameter (in) : 14
Impeller Fins : 7
Impeller Material : steel
Length (in) : 61
Motor HP : 3HP
Motor Phase : 1PH
Motor Voltage : 230V
Net Weight : 189 pound
Overall Dimensions : 61 x 30 x 94
Part Number : 1791075BK
Particle Size (Micron) : 96% of 30 micron particles
Remote Control : Yes
Sound Rating (dB) : 75-90
Static Pressure (inch of water) : 11.31
Velocity @ 4" (FPM) : 5200
Width (in): 30 (less...)

Remote-controlled digital timer can be programmed for up to 99 minutes All-metal duct construction for rigidity and improved air flow 30-micron filter bags for improved capture of fine dust particles The large impel (more...)

Remote-controlled digital timer can be programmed for up to 99 minutes
All-metal duct construction for rigidity and improved air flow
30-micron filter bags for improved capture of fine dust particles
The large impeller is powered by a 3HP motor for peak performance
Triple 4” dust ports allow for several hoses to be attached at the same time
Cloth collection bags with view window use a snap ring for rapid installation/removal
10 cubic feet collection bag capacity reduces number of bag changes.
Tall filter bags require less cleaning due to the larger surface area
Four swivel casters for shop maneuverability
3HP TEFC motor
Remote control
Magnetic starter
2 Cloth filter bags with straps
2 Cloth collection bags
Swivel casters
Triple 4” dust port
1-Hose Connection Diameter (in) : 8
2-Hoses Connection Diameter (in) : 4
3-Hoses Connection Diameter (in.) : 4
Air Flow @ 4" (CFM) : 234 (1754 @ 8")
Air Inlet (in) : (3) at 4" or (1) at 8"
Amps : 15
Bag Diameter (in) : 20
Collection Bag Capacity (cu. ft.) : 10
Collection Bag Length (in) : 30
Filter Bag/Canister Length (in) : Filter Bag - 48
Height (in): 94
Impeller Diameter (in) : 14
Impeller Fins : 7
Impeller Material : steel
Length (in) : 61
Motor HP : 3HP
Motor Phase : 1PH
Motor Voltage : 230V
Net Weight : 189 pound
Overall Dimensions : 61 x 30 x 94
Part Number : 1791075BK
Particle Size (Micron) : 96% of 30 micron particles
Remote Control : Yes
Sound Rating (dB) : 75-90
Static Pressure (inch of water) : 11.31
Velocity @ 4" (FPM) : 5200
Width (in): 30 (less...)

2-micron canister filter offers over six times filtering surface area of standard bags All-metal duct construction for rigidity and improved air flow Powerful 3HP motor powers the large impeller for peak perform (more...)

2-micron canister filter offers over six times filtering surface area of standard bags
All-metal duct construction for rigidity and improved air flow
Powerful 3HP motor powers the large impeller for peak performance
Triple 4” dust ports allow for several hoses to be attached at the same time
Quick connect collection bags don’t require straps
10 cubic feet capacity reduces number of bag changes.
Four swivel casters make the unit easy to maneuver around the shop
Standard Equipment:
3HP TEFC motor
2 Canister filters
2 Clear collection bags
Swivel casters
Triple 4” dust port (less...)

The Powermatic Hollow Chisel Mortiser floor model is a brute. With a 1 HP, 1 Ph, 115V motor and heavy cast iron construction, this mortiser can make a full 8" chisel stroke. Features work stop, depth and length sto (more...)

The Powermatic Hollow Chisel Mortiser floor model is a brute. With a 1 HP, 1 Ph, 115V motor and heavy cast iron construction, this mortiser can make a full 8" chisel stroke.
Features work stop, depth and length stopsLarge 20" long table moves left and right, and forward and back, making setups easier and quicker Smooth rack and pinion action lowers the entire head to feed the chisel into the work piece solidly Chisel and bit sets are available in 7 sizes from 1/4" to 1" Chuck capacity is 1/2"; Spindle speed: 1725 RPMTable size is 7" x 20-1/4" and will adjust to any angle between 0 and 35° Table movement: 16" long-ways, 4-1/2" cross-ways Includes enclosed base; overall height is 61" (less...)

In-line depth stop allows stopping at pre-set depths without racking the bit to the base Heavy-duty reversible handle can be installed to either side of the head without tools Stock hold-down with a double lock syst (more...)

In-line depth stop allows stopping at pre-set depths without racking the bit to the base
Heavy-duty reversible handle can be installed to either side of the head without tools
Stock hold-down with a double lock system, top and side, to eliminate slippage of workpiece
Quick action cam lock will quickly lock fence in position with one 90° movement
2 integrated bit and chisel spacers for quick set up
Large work surfaces on both table and fence for greater stability and accuracy
Large, hinged chuck door with magnetic catch for rapid access to the chuck
Rack and pinion design for simple fence adjustments
Integrated chisel and tool holder with sharpening stone
1/2" drill chuck with 4" chuck key
Removable safety switch key
Amps : 8/4
Base Size (in.) : 16-5/16 x 13-3/4
Bushing Size (in.) : 5/8 and 3/4
Chisel Center to Fence (in.) : 4-3/8 maximum
Chisel Shank Capacity (in.) : 3/4
Chuck Size (in.) : 1/2
Fence Size (L x H/in.) : 2-5/8 x 12-1/2
Head Stroke (in) : 5-1/2
Height : 17.4 inch
Length : 24.2 inch
Motor HP : 3/4HP
Motor Phase : 1PH
Motor Voltage : 115/230V
Net Weight (in): 93
Overall Dimensions : 24.2 x 19.2 x 17.4
Part Number : 1791310
Prewired : 115V
Spindle Speed (RPM) : 1725
Spindle Speeds : 1720 RPM
Table Size (in.) : 11 x 13
Under Hold-Down (in.) : 5
Width (in): 19.2 (less...)

Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance Manual eccentric clamping will keep boards firm Eccentric spindle collet for resharpened cutters Spring loaded carriage makes for smooth, eff (more...)

Four centerlines - 1", 1-1/2", 2" and 2-1/2" - create a custom appearance
Manual eccentric clamping will keep boards firm
Eccentric spindle collet for resharpened cutters
Spring loaded carriage makes for smooth, effortless dovetail cutting
Cutter height of 3/16" to 3/4" accommodates different cutting depths and board thicknesses
Extra large soft grip handle provides positive control and comfort
The precision linear carriage bearings are sealed on both ends to eliminate dust buildup
Visual stylus and template aid in guiding the carriage
Material stops provide convenient positioning of the workpiece
Cast iron and steel construction for added stability and durability
1HP motor transfers plenty of power via the drive belt to the spindle
Four-sided template
Workstops
Tool kit
Dovetail bit
Dust chute with hose
Center to Center Dovetail Spacing (in) : 1, 1-1/2, 2 and 2-1/2
Dust Collection Minimum CFM Required : 500
Dust Port Diameter (OD/in) : front 2-1/2, rear 4
Height (in): 61
Length (in): 33
Maximum Dovetail Height (in) : 3/4
Maximum Front Thickness (in) : 1-3/4
Maximum Side Thickness (in) : 1-3/16
Maximum Work Piece Size (L x W/in) : 31 x 11
Minimum Dovetail Height (in) : 3/16
Minimum Front Thickness (in) : 9/32
Minimum Side Thickness (in) : 9/32
Minimum Work Piece Size (L x W/in) : 7-7/8 x 2-3/8
Motor HP : 1HP
Motor Phase : 1Ph
Motor Voltage : 115/230V
Net Weight : 424 pound
Number of Spindles : 1
Overall Dimensions : 33 x 33 x 61
Part Number : 1791304
Prewired : 115V
Spindle Speed (RPM) : 18500
Table Height From Floor (in) : 35
Width (in): 33 (less...)

This little brute will handle any kind of job up to 1/2" drilling, 1/2" end mills and 1" facing. No belt changes necessary! The variable speed control and gear drive saves you time and hassle. Truly, a remarkable ma (more...)

This little brute will handle any kind of job up to 1/2" drilling, 1/2" end mills and 1" facing. No belt changes necessary! The variable speed control and gear drive saves you time and hassle. Truly, a remarkable machine.
Features:Dovetail column
Safety shut off switch
Adjustable depth stop
Fine feed head control
Geared drive
Clear guard on spindle
Rubber chip guards on ways
Zero setting dials
Dials read inches
Adjustable dovetail ways on column
3/8" and 1/2" collets
1/2" drill chuck
2 T-nuts
Specifications:Spindle Taper: MT #3
Head Travel: 9-7/8"
Head Tilt: 45 degrees L/R
Max. distance spindle to table: 11-1/2"
Swing: 12-3/4"
Longitudinal Travel: 7-7/16"
Cross-slide travel: 4"
Table size: 3-5/8" x 15-3/4"
Speeds: Variable
Speed Range: 0-2500 RPM
Motor Size: 3/4 HP
Shipping Weight: 153 lbs. (less...)

This rugged little brute is the cat's meow in small mill/drills. It has more features than even some of the large mill/drills starting with a dovetail column and variable speeds. And it comes with coolant troughs in (more...)

This rugged little brute is the cat's meow in small mill/drills. It has more features than even some of the large mill/drills starting with a dovetail column and variable speeds. And it comes with coolant troughs in the table, adjustable gibs in all the slides, a reversing switch, a standard 7/16"-20 TPI draw bar, R-8 spindle and easy to read dials with inch cut lead screws. With all these features and mass, you'll be able to mill, drill, bore and ream through the most serious hobby projects around!
SpecificationsMotor size: 3/4 HP, 110V, single-phase, universal
Spindle taper: R-8
Spindle travel: 3 3/8"
Swing: 18"
Max. distance spindle to table: 14 3/4"
Collars calibrated: .001"
T-Slots: 3@ 1 11/16" centers, 3/8" studs
Table size: 6 1/4" x 21 5/8"
Table travel (longitudinal): 15 7/8"
Table travel (cross): 5 3/4"
Headstock travel: 14 7/8"
Drilling capacity: 1"
Quill diameter: 2.347"
Variable speed: 100-1000, 100-2000 (Hi-lo gearbox)
Approximate shipping weight: 372 lbs.
FeaturesDovetail column with handwheel graduated in .0005"
Infinitely variable spindle speed from 0-4000 RPM
Push button emergency switch with indicator lights
Almost 14" of headstock movement
2 speed gear box
Reversing switch
Coolant trough
Circuit fuse
Dial speed control
Dovetail column
Includes: 5/8" drill chuck and arbor, 2 T-nuts, 2 open end combo wrenches, 4 Allen® wrenches, extra drive belt, and 4 leveling feet. (less...)

Description The Model G1005Z Mill/Drill comes complete with 1/2" drill chuck, small angle drilling vise, and carbide-tipped fly cutter. Features: Head swivels 360º Front-mounted ON-OFF switch with thermal overloa (more...)

Description
The Model G1005Z Mill/Drill comes complete with 1/2" drill chuck, small angle drilling vise, and carbide-tipped fly cutter.
Features:Head swivels 360º
Front-mounted ON-OFF switch with thermal overload protection
Heavy-duty 1 HP motor
Excellent speed range
Extremely quiet machine
Easy clutch-type mechanism for engaging fine down-feed
Positive quill lock
Adjustable gibs on table
Adjustable stops on table
Spindle supported by heavy-duty, tapered roller bearings
Graduations in inches
Specifications:Spindle taper: R-8
Spindle travel: 3-5/8"
Swing: 16"
Max. distance spindle to table: 15-3/4"
Column size: 3-3/4"
Collars calibrated: .001"
T-Slots: 3 @ 1-3/4" centers, 3/8" Studs
Table size: 7-1/2" x 23"
Longitudinal table travel: 12"
Cross-slide travel: 6"
Drilling capacity: 1"
Number of speeds: 12
Range of speeds: 110-2580 RPM
Motor size: 1 HP
Approximate shipping weight: 420 lbs. (less...)